Hello, this is my current equipment/setup: OS: Windows 7 Servo: AX-18A Board: OpenCM9.04 (Type-C) Expansion: OpenCM 485 Power: Supplying 12V/0.58A to Expansion board and PC is connected to 9.04 with Micro USB to USB 2.0 Previous success: I was able to perform the Basics example to blink the LE…

AX-18A read_write_ax basics, servo not moving

roboteer February 4, 2022, 5:03pm 5

If you are interested in using the Dynamixel2Arduino library instead, this post may be of help to you.