Opencr 업데이트 오류 문의


현재 터틀봇3 kinetic으로 설치중입니다. 앞선 절차들은 순조롭게 되었으나 opencr 업데이트시 오류가 발생하여 문의드립니다.
사진과 같이 '[NG] Unable to open .opencr’라는 문장이 뜹니다. 해결방법이 있을까요?

안녕하세요.

OpenCR1.0 복구 모드로 진입 후 다시 업로드를 시도 해주세요.

  1. If firmware upload fails, try uploading with the recovery mode. Below sequence activates the recovery mode of OpenCR. Under the recovery mode, the STATUS led of OpenCR will blink periodically.
  • Hold down the PUSH SW2 button.
  • Press the Reset button.
  • Release the Reset button.